Wifi datalogger2 with Weather Display

Hardware Weather Station Equipment
,
1

I just updated to a Vantage Pro 2 with a wifi datalogger 2. I had it working fine, but had to unplug the unit. I had batteries installed, apparently one was dead. Now it does not update the Weather Display software.

Weather Display debug shows that is connected and I can open the wifi data logger 2 set-up page on my browser.

Any suggestions would be appreciated.

Thanks,

John

2

Not familiar with the “wifi datalogger 2” but you might check to see if the console is in USBExpress mode.

3

Not sure where to check for that on the console. More info needed.

John

4

This https://discourse2.weather-watch.com/t/thinking-about-using-wd/55015/3 might help. FAQ is mentioned a couple of posts down.

1 Like