Finally, I have managed to get a computer with Windows XP so, now I do not have any more problems with this.
I have followed Budgie’s FAQ: http://discourse.weather-watch.com/t/55402
By the time, I have a similar window to this. So, I understand that the sensor works.
If I open Weather Display leaving the Dallas 1 Wire Reader running; in “Current Reading” in the “Solar Sensor Setup” page, I am getting the same data as in the Dallas 1 Wire Reader.
It confirms that the sensor works and is interacting with the computer.
My problem now is that the data is shown in mv, not in w/m2, and I do not Know how to change it.
Another thing is that I only can see the sensor graph in the “Extra Sensor Real Time Graph” page, but not in the main graph page.
Basically, I need a bit of help about how to configure the sensor in the Weather Display program.
Is there a guide about how to configure the sensor or the different steps I have to follow?
I have never done something like this and I do not want to skip any step.
Thanks for all your patience and all your help.